John Deere Flex Wing Rotary Mowers - heavy duty
Models : CX20, CX15, HX20, HX15, MX15 **(540RPM and 1000 RPM)
(Original Equipment is Walterscheid 2580 - shown above)
MAIN SHAFT : CAT 5 Constant Velocity - all models
|
Our research indicates most tractors using 1.750-20 spline
and input shaft to power divider is 1.750-20 spline
Other combinations are available. |
 |
CAT 6 Constant Velocity (Walterscheid 2580 series) |
|
|
Tractor Output Shaft |
Complete CV Assembly
Part Number (no implement yoke) |
|
Implement Half (2500)
Part Number
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2580 CV breakdown |
|
| POWER DIVIDER INPUT AND OUTPUT SHAFTS ARE 1.75-20 SPLINE |
Connecting yoke
| Series |
Bore |
Part Number |
CAT4 * 2400 |
1.750-20 |
|
CAT5/6 * 2500 |
1.750-20 |
|
|
 |
CENTER SHAFT |
Our research indicates all shafts on power divider are 1.750-20 spline
| Model |
PTO size |
| MX15 |
CAT4 |
| HX15 |
CAT4 |
| HX20 |
CAT4 |
| CX15 |
CAT5 |
| CX20 |
CAT5 |
connecting yoke / clutch
|
|
WING SHAFTS: CAT 4 /5 STANDARD |
| Model |
PTO size |
| MX15 |
CAT4 |
| HX15 |
CAT4 |
| HX20 |
CAT4 |
| CX15 |
CAT5 |
| CX20 |
CAT5 |
connecting yoke / clutch
Assemblies:
| Series |
Description |
Part Number |
CAT4 * 2400 |
Base Assembly |
|
CAT5/6 * 2500 |
Base Assembly |
|
|
|
|
| POWER DIVIDER INPUT AND OUTPUT SHAFTS ARE 1.75-20 SPLINE |
Connecting yoke
| Series |
Bore |
Part Number |
CAT4 * 2400 |
1.750-20 |
|
CAT5/6 * 2500 |
1.750-20 |
|
|
|
| GEAR CASE INPUT SHAFTS ARE 1.75-20 SPLINE |
K90/4T Friction Clutch
| Series |
Bore |
Clutch Part Number |
CAT4 * 2400 |
1.750-20 |
|
CAT5/6 * 2500 |
1.750-20 |
|
|
|
